Shorelandr SS1100 Manual do Utilizador descarregar pdf

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003847

Page 1 08/24/07

ACCESSORY

SS1100

ShoreLock’r with Mounting Brackets & Bunk

The SS1100 ShoreLock’r storage unit and walk board is designed

to t the double PWC trailers. It attaches to the cross members and

the two side frames.

Assembly Instructions

• Open the ShoreLock’r and locate the mounting hardware lo-

cated on the inside. Remove and sort all items by size.

• Locate the ShoreLock’r mounting bracket. Position it on the

rear of the ShoreLock’r as shown.

• Align the holes in the mounting bracket with the holes in the

ShoreLock’r. Place a 3/8” at washer on each of two 3/8” x

¾” hex bolts. Thread the bolts into the threaded holes in the

ShoreLock’r. Tighten.

• Locate the walkboard mounting bracket and the winch tube

strap. Align the holes of the walkboard mounting bracket with

the mating holes in the ShoreLock’r mounting bracket.

• Drop a 3/8” x 3 7/16” x 4 1/8” U-bolt down over the square

tube section and through the mating holes of the ShoreLock’r

mounting bracket.

• Place the winch tube strap over the legs of the U-bolts on the

bottom side of the ShoreLock’r mounting bracket. Thread on

3/8” ange lock nuts. Run the nuts on the threads until they are

about tight. Do not completely tighten until after the ShoreLock’r

is totally installed on the trailer.

• Position the assembled unit onto the frame of the trailer so it is

supported by the two side frames and the ShoreLock’r mount-

ing bracket. Align the hole in the ShoreLock’r mounting bracket

with the hole provided in the front cross member.

• Drop a 3/8” x 3 ½” carriage bolt into the aligned holes. Place

a 3/8” at washer, 3/8” lock washer and then a 3/8” nut on the

threaded end of the bolt. Hand tighten until instructed to tighten

later.

• Align the holes in the inside front of the ShoreLock’r with the

holes in the side frame. Locate one of the two 3/8” x 5” hex

bolts. Place a at washer on the bolt and then insert it into one

of the aligned holes. Repeat on the second hole and bolt in the

other side frame. Secure using 3/8” ange lock nuts.

• Once all of the attaching bolts have been installed, tighten all

bolts at this time.

• Locate the walkboard. It has carriage bolts installed in it prior to

the carpet being attached to it. Remove the nuts and other at-

taching hardware.

• Position the walkboard so the front bolt inserts into the hole

provided in the at plate section of the ShoreLock’r mounting

bracket. Drop the rear bolt down through the hole provided in

the rear cross member.

• Place a at washer, lock nut and hex nut on each of the two

mounting bolts. Tighten.

• Assembly is complete.

1 2

ACCESSORY 1
08/24/07 2

Resumo do Conteúdo

Página 1 - ACCESSORY

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003847Page 1 08/24/07ACCESSORYSS1100ShoreLock’r with Mount

Página 2 - 08/24/07

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003847Page 2 08/24/07

Comentários a estes Manuais

Sem comentários

Shorelandr SS1100 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Reboques Shorelandr SS1100. ShoreLand'r SS1100 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Reboques Shorelandr SS1100